![]() |
|
|
|
|||||||
| Register | FAQ | Members List | Calendar | Mark Forums Read |
![]() |
|
|
Thread Tools | Display Modes |
|
#1
|
|||
|
|||
|
protective tape for putting on hard top
I used the all the gasket/tape that gets put down before putting the hard top back on my 2003. New tape costs $150. Any other ideas to protect the finish? What makes this tape so special?
|
|
#2
|
|||
|
|||
|
.....this is my fourth winter....and I don't worry about that procedure.....may- be it's the colour (Inspiration Yellow)....It's not a big issue....minor chaffing but is not any more noticeable than year one....mostly buffs out....Clean and lubricated contact surfaces are key......I would be 103 before any noticable wear would take place, I'm sure!........
|
|
#3
|
|||
|
|||
|
one solution
I used a SS strip that I got from WWW.thunderbirdconcepts.com and it solved the problem, also tightened up the top fit. Hope this helps
|
|
#4
|
||||
|
||||
|
People I know that have tried the Invinca-shield strips say they are much better, and far cheaper, than the Ford strips.
http://www.invinca-shield.com/n_genk...it=1436-A&ft=1 |
|
#5
|
|||
|
|||
|
Invinca is a great product....infact, for those who have the stainless strips, I would recommend the invinca over them as well. After all they are stainless and they do get minor abrasions on them.
OR, for those who have the Ford strips left over, use them over the stainless until you run out-just a suggestion. |
|
#6
|
|||
|
|||
|
Stainless Steel Strip Movement
I have the stainless steel strips for protection of the paint under the hardtop. I'm very satisfied with the strips as protection and they reduce the dreaded top noise. However, when I removed my hardtop for the cool fall "top down" weather, the side strips had moved 1/4 inch (both side strips) The supplier replaced the strips and I haven't had the hardtop on since replacement. Anyone have the problem or suggestions to prevent the movement. Maybe I'm being too picky.
|
|
#7
|
|||
|
|||
|
Interesting post JetBird.....QAA put the strips on my car almost three years ago as a test. We also did the pictures (blackbird, for their website and these pics are also on their dealer sites). I drove the car 2500 miles and removed the top to reveal only slight chaffing on the strips.
We put the top back on and it's been on ever since. Just recently bought an electric hoist, so the top will come off in the springtime - I wonder what I'll find????? ![]() |
|
#8
|
|||
|
|||
|
Quick, that link isn't working for me, do you have another one?
__________________
4 years and 18,000 miles later, I still love driving my T-Bird! ![]()
|
|
#9
|
|||
|
|||
|
Sophia: Great to see you posting again. I shortened Quickdraws url to Invinca-Shield.com and got the following:
http://clearfilmprotection.com/ I assime that you can probably follow that site through to TBirds. |
|
#10
|
|||
|
|||
|
Thanks, I got the stainless strip ordered and will put the Mylar on it.
__________________
4 years and 18,000 miles later, I still love driving my T-Bird! ![]()
|
|
#11
|
|||
|
|||
|
I received the stainless strip. I thought it would be a lot wider, enough to show when the hardtop is on, like the dirty clear tape. It is really narrow.
__________________
4 years and 18,000 miles later, I still love driving my T-Bird! ![]()
|
|
#12
|
|||
|
|||
|
Sophia:
The original strips went out to the third tail light and didn't look good at all. Since the manufacturer is 5 miles away from me we got together and made the change to what it is today. This was done because most TBird owners at that time did not want to see any part of the strip when the hardtop was on. So yes, they are very thin, but on purpose. |
|
#13
|
|||
|
|||
|
Thanks George, that's good to know.
__________________
4 years and 18,000 miles later, I still love driving my T-Bird! ![]()
|
|
#14
|
|||
|
|||
|
Just signed up, interesting thread. I have a 02 Bird Whisper White I think,
and I have never used any of the protection strips. Still have the originals in the plastic bag. Appears not to have caused any problems, but then again we have not put the hard top on in over a year. But prior years no problems. Bought this 02 new, and just hit 6k miles. I seem to be one of the few that have never had any problems, not even dead batteries. Car does stay in garage. |
|
#15
|
|||
|
|||
|
That's great Edward, and WELCOME!!
If and when you put that hardtop on, it's always good to apply a coat of wax to the sail panel and be sure to wipe down the hardtop gasket before lowering the hardtop onto the car. In fact, since it's laying dormant, it may do well to treat that hardtop gasket to a rub of rubber protectant. It will keep the rubber gasket soft and plyable but most of all, prevent deterioration over time. It will also be easy to wipe down when you put the hardtop on. Just a thought.. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|